MONSTERS OF SMOKE Bongs How to Prevent Your Glass Bong from Getting Clogged or Dirty with Resin or Ash

How to Prevent Your Glass Bong from Getting Clogged or Dirty with Resin or Ash

July 18, 2023July 18, 2023 Daniel PaxtonDaniel Paxton 0 Comments 11:03 am
Categories:

`

If you enjoy smoking herb or tobacco from a glass bong, you know how important it is to keep it clean and unclogged. A dirty bong can ruin your smoking experience by making the hits harsher, dulling the flavor of the smoke, and exposing you to mold and bacteria. Not to mention, it looks unsightly and smells bad.

Fortunately, cleaning a glass bong is not hard or expensive. You just need some basic supplies and a few minutes of your time. In this blog post, we will show you how to prevent your glass bong from getting clogged or dirty with resin or ash, and how to clean it when it does.

How to Prevent Your Glass Bong from Getting Clogged or Dirty

The best way to prevent your glass bong from getting clogged or dirty is to take care of it regularly. Here are some tips to keep your bong in good shape:

  • Change the water in your bong after every smoke session. This will prevent the water from getting stale and contaminated with tar and debris. Stale water can also affect the taste and smell of the smoke, and increase the risk of inhaling mold and bacteria.
  • Use a screen or a filter in your bowl. This will prevent ash and herb particles from falling into the water and clogging the stem or the downstem. Screens and filters are cheap and easy to find at any head shop or online store. You can also make your own screen from a piece of aluminum foil.
  • Empty and rinse your bong after each use. This will remove any residue or buildup that may have accumulated in the bowl, the stem, or the downstem. You can use warm water to rinse your bong, or alcohol if you want to disinfect it.
  • Store your bong in a cool, dry place. This will prevent dust, dirt, and moisture from getting into your bong and causing damage. Avoid leaving your bong in direct sunlight, as this can cause the glass to crack or fade.

How to Clean Your Glass Bong When It Gets Clogged or Dirty

If you notice that your glass bong is clogged or dirty, don’t worry. You can easily clean it with some household items. Here are some methods you can try:

Method 1: Alcohol and Salt

This is one of the most popular and effective methods of cleaning a glass bong. Alcohol reacts with the tar and resin, making it easier to remove. Salt acts as an abrasive, scrubbing away any stubborn stains. Here’s what you need:

  • Isopropyl alcohol (70% or 90%)
  • Coarse salt (such as kosher salt or sea salt)
  • A resealable plastic bag (for smaller parts)
  • Cotton swabs or pipe cleaners (for hard-to-reach areas)

Here’s what you do:

  1. Separate all the moving parts from the bong, such as the bowl, the slide, and the stem.
  2. Rinse out the pieces in hot water to loosen up any big chunks of resin or ash.
  3. Knock off any large pieces of resin with cotton swabs or pipe cleaners.
  4. Place the smaller parts in a resealable plastic bag, and fill it with enough alcohol to cover them. Add some salt to the bag as well.
  5. Seal the bag and shake it vigorously for a minute or two. You should see the alcohol turning brown as it dissolves the resin.
  6. Pour out the alcohol/salt mixture and rinse the pieces with warm water. Repeat if necessary until they are clean.
  7. Pour some alcohol and salt into the bong itself, and cover the holes with your hands or some plastic wrap.
  8. Shake the bong for a minute or two, then pour out the alcohol/salt mixture and rinse with warm water. Repeat if necessary until it is clean.
  9. Let all the pieces dry completely before reassembling and using your bong.

Method 2: Lemon Juice and Boiling Water

This is another natural and effective method of cleaning a glass bong without alcohol. Lemon juice is acidic and can break down the resin, while boiling water can loosen up any clogs and kill any germs. Here’s what you need:

  • Lemon juice (fresh or bottled)
  • Boiling water
  • A large pot or bowl (for the bong)
  • A resealable plastic bag (for smaller parts)

Here’s what you do:

  1. Separate all the moving parts from the bong, such as the bowl, the slide, and the stem.
  2. Rinse out the pieces in hot water to loosen up any big chunks of resin or ash.
  3. Place the smaller parts in a resealable plastic bag, and fill it with enough lemon juice to cover them.
  4. Seal the bag and let it soak for a few hours or overnight. You should see the lemon juice turning brown as it dissolves the resin.
  5. Pour out the lemon juice and rinse the pieces with warm water. Repeat if necessary until they are clean.
  6. Pour some lemon juice into the bong itself, and swirl it around to coat the inside.
  7. Boil some water in a large pot or bowl, and carefully pour it into the bong. Be careful not to burn yourself or crack the glass.
  8. Let the bong sit for a few minutes, then pour out the water and rinse with warm water. Repeat if necessary until it is clean.
  9. Let all the pieces dry completely before reassembling and using your bong.

Conclusion

Cleaning a glass bong is not hard or expensive. You just need some basic supplies and a few minutes of your time. By following these tips and methods, you can prevent your glass bong from getting clogged or dirty with resin or ash, and enjoy a smooth and flavorful smoke every time.

Sources:

“`

You May Also Like