If you enjoy smoking herb or tobacco from a bong, you know how important it is to keep your piece clean and fresh. A dirty bong can ruin the taste of your smoke, harbor harmful bacteria and mold, and damage the longevity of your glass. Fortunately, cleaning a bong is not too difficult, especially if you have some alcohol and salt handy. Here’s how to do it in a few simple steps.
What You Need
- A dirty bong
- Coarse salt, such as sea salt, Epsom salt, or rock salt
- Isopropyl alcohol, 91% or 99%
- Two large zipper storage bags
- Rubber stoppers or bong plugs
- A towel
- Water and soap
Step 1: Disassemble Your Bong
The first thing you need to do is take apart your bong and remove any detachable parts, such as the bowl, the stem, and the percolator. Rinse them with water to get rid of any loose debris and gunk. You can use a pipe cleaner or a cotton swab to reach any hard-to-clean spots.
Step 2: Place the Parts in Zipper Bags with Alcohol and Salt
You can buy a bong-specific cleaning solution, but isopropyl alcohol and salt are your best (and cheapest) bet. Pour a handful of coarse salt into each bag and add enough rubbing alcohol to fully submerge the parts. The salt will act as an abrasive and help scrub away the resin, while the alcohol will dissolve it. Seal the bags and shake them vigorously for a few minutes. You should see the alcohol turning brown as it removes the dirt from the glass.
Step 3: Fill Your Bong with Alcohol and Salt
Now it’s time to clean the main body of your bong. Pour some salt into the chamber and add enough alcohol to cover the bottom. Plug the openings of your bong with rubber stoppers or bong plugs to prevent any leaks. You can also use plastic wrap and rubber bands if you don’t have any plugs. Shake your bong well for about five minutes, making sure the alcohol and salt mixture reaches every part of the glass. You can also let it soak for a while if it’s very dirty.
Step 4: Rinse Everything with Water and Soap
Once you’re done shaking and soaking your bong and its parts, it’s time to rinse them with water and soap. Dispose of the dirty alcohol carefully and wash your bong and its parts under hot water. Use some dish soap to remove any remaining residue and odor. You can also use a pipe cleaner or a cotton swab to clean any stubborn spots. Rinse everything again with water until it’s sparkling clean.
Step 5: Dry Your Bong and Enjoy
The final step is to dry your bong and its parts with a towel or let them air dry. Make sure there’s no moisture left inside the chamber or the stem, as this can lead to mold growth. Reassemble your bong and admire your work. You now have a clean and fresh bong ready for your next smoke session.
Conclusion
Cleaning a bong with alcohol is easy and effective. All you need are some common household items and some elbow grease. By following these steps, you can keep your bong in good shape and enjoy a smoother and tastier smoke every time.
This blog post was generated by Bing using information from various sources . It does not reflect Bing’s opinion or endorsement of any product or service.
: https://www.rubbing-alcohol.com/what-rubbing-alcohol-to-clean-bong/
: https://www.insider.com/guides/home/how-to-clean-a-bong
: https://weedmaps.com/learn/products-and-how-to-consume/how-to-clean-a-bong
: https://www.rollingstone.com/product-recommendations/lifestyle/how-to-clean-a-bong-1121339/
